 idVendor: 0x0A89
  iManufacturer: Aktiv
 idProduct: 0x006A
  iProduct: Rutoken SCR 3101 NFC Reader
 bcdDevice: 5.13 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 0
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 Can't get iInterface string: LIBUSB_ERROR_INVALID_PARAM
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.00
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x01
   5.0V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 3.580 MHz
  dwMaximumClock: 5.000 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: LIBUSB_ERROR_PIPE
  dwDataRate: 9600 bps
  dwMaxDataRate: 312500 bps
  bNumDataRatesSupported: 19
   Support 9600 bps
   Support 13984 bps
   Support 19200 bps
   Support 19531 bps
   Support 26881 bps
   Support 27968 bps
   Support 38400 bps
   Support 39062 bps
   Support 53763 bps
   Support 55937 bps
   Support 78125 bps
   Support 111875 bps
   Support 115200 bps
   Support 156250 bps
   Support 161290 bps
   Support 223750 bps
   Support 312500 bps
   Support 447500 bps
   Support 625000 bps
  dwMaxIFSD: 254
  dwSynchProtocols: 0x00000000
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x000204B8
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....80 Automatic PPS made by the CCID
   ..04.. Automatic IFSD exchange as first exchange (T=1)
   02.... Short APDU level exchange
  dwMaxCCIDMessageLength: 271 bytes
  bClassGetResponse: 0xFF
   echoes the APDU class
  bClassEnvelope: 0xFF
   echoes the APDU class
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1
